Skip to main content

CIP vs CIL vs CIC: Difference Between Gold Leaching Processes

Activated Carbon in CIP, CIL and CIC Gold Circuits

Gold dissolved in a cyanide leach is captured on activated carbon, and the carbon circuit is where a gold plant recovers its product. Three circuit layouts are in use: Carbon in Pulp (CIP), Carbon in Leach (CIL) and Carbon in Column (CIC). SorbiTech™ Group, a global activated carbon manufacturer, supplies OraPure coconut shell activated carbon for all three, including gold operations across Africa and the GCC.

Where OraPure Works in a Gold Operation

Ore from the mine is crushed, ground and leached with cyanide to dissolve the gold. On a mill based operation the leached slurry passes through a CIP or CIL circuit, where OraPure captures the dissolved gold. On a heap leach operation, lower grade ore is stacked on a pad and irrigated, and the gold bearing solution is pumped through CIC columns charged with the same carbon.

In every layout the loaded carbon is sent for gold stripping, reactivated and returned to the circuit, so the same carbon inventory recovers gold over many cycles.

Where activated carbon works in a gold operationMill based operation: mined ore, crushing and grinding, cyanide leach, carbon in a CIP or CIL circuit, gold stripping, gold to the refinery. Heap leach operation: mined ore, heap leach pad, gold bearing solution, carbon in CIC columns, then the same gold stripping step.MILL BASED OPERATIONHEAP LEACH OPERATIONMined oreCrushing andgrindingCyanideleachOraPure inCIP or CILGoldstrippingGold to therefineryMined oreHeap leachpadGold bearingsolutionOraPure inCIC columnsloaded carbonSolution returned to the heap
OraPure is the carbon in the gold capture step of both mill based and heap leach operations.

The Three Carbon Circuits

Activated carbon in CIP, CIL and CIC circuitsCIP: leach tanks followed by capture tanks holding the carbon. CIL: carbon in the leach tanks from tank two onward. CIC: carbon in upflow columns treating clear heap leach solution. In each, the slurry or solution moves forward while the carbon moves the opposite way.CIPLeach first, then capture goldCILLeach and capture togetherCICClear solution through columnsLeachGold captureCarbonSlurryClean leaching oreCarbon in the capture tanksCarbon from tank 2 onwardCarbonSlurryOre with natural carbonCarbon in the leach tanksCarbonSolution (upflow)Heap leach solutionCarbon in the columns
In every circuit the slurry or solution moves forward while the carbon moves the opposite way, so fresh carbon meets the leanest liquor.

Carbon in Pulp (CIP)

In CIP, the ore is leached first and the leached slurry then flows through a series of gold capture tanks. The carbon moves through the tanks against the slurry flow, picking up gold until it is fully loaded at the first tank, where it is drawn off for stripping. CIP suits ores that leach cleanly and carry little natural carbon. Because the carbon travels through every capture tank, OraPure is supplied for durability in moving slurry, which keeps carbon losses down and gold loading steady.

Carbon in Leach (CIL)

In CIL, leaching and gold capture happen in the same tanks, with OraPure added from the second or third tank onward. The layout is chosen where the ore contains natural carbon that would otherwise take up the dissolved gold and carry it to waste, a problem known as preg robbing. With carbon present from the start of the leach, the gold is captured by the activated carbon before the ore can take it.

Carbon in Column (CIC)

In CIC, leaching happens upstream, usually on a heap leach pad, and only the clear gold bearing solution reaches the carbon. The solution flows upward through a series of columns charged with OraPure; loaded carbon is drawn from the first column and fresh carbon is added to the last. With no slurry in contact, the carbon lasts longer in service, which makes CIC the standard choice for heap leach gold operations.

Side by Side Comparison

Parameter CIP CIL CIC
What reaches the carbon Leached slurry Slurry during leaching Clear solution
Leaching and gold capture In sequence In the same tanks In sequence
Ore with natural carbon (preg robbing) Not suited Suited Not applicable
Wear on the carbon High Highest Low
Typical operation Mill based, clean leaching ore Mill based, carbon bearing ore Heap leach, low grade ore
OraPure role Carbon in the capture tanks Carbon added to the leach tanks Charge in the upflow columns

CIL is the most common layout on new mill based plants because one set of tanks handles both leaching and gold capture. CIP remains in use where the ore leaches cleanly, and CIC remains the standard for heap leach operations. All three sit within the wider activated carbon gold recovery application.

The Carbon Cycle in a Gold Plant

Loaded carbon leaves the circuit for acid washing and gold stripping. The gold goes on to the refinery, and the stripped carbon goes through activated carbon regeneration and returns to the circuit for the next cycle. A small share of carbon is worn away in each cycle and is replaced with fresh OraPure, supplied by SorbiTech to operations across Africa, including gold plants in Sudan, and the GCC.

Activated carbon cycle in a gold plantLoaded carbon leaves the circuit for acid wash and gold stripping. The gold goes to the refinery, and the carbon is reactivated and returned to the circuit.Loaded OraPurefrom the circuitAcid washGold strippingReactivationGold to the refineryReactivated carbon returns to the circuit
The same carbon inventory recovers gold cycle after cycle; only the gold leaves the loop.
SorbiTech Group

OraPure Carbon for CIP, CIL and CIC Operations

SorbiTech™ Group manufactures OraPure activated carbon for gold operations worldwide. Supply covers gold plants across Africa, the UAE, Saudi Arabia and the wider GCC. One product line serves CIP, CIL and CIC circuits, so an operation running both a mill and a heap leach can hold a single carbon in inventory.

Request a Quote for Your Circuit

Frequently Asked Questions

Which SorbiTech carbon is supplied for CIP, CIL and CIC circuits?

OraPure coconut shell activated carbon is supplied for all three circuits. The same product line is used in the capture tanks of a CIP plant, the leach tanks of a CIL plant and the columns of a CIC circuit.

Which circuit suits ore that contains natural carbon?

CIL is the usual choice. Natural carbon in the ore can take up dissolved gold and carry it to waste, so the carbon is added directly to the leach tanks to capture the gold as soon as it dissolves.

Is the carbon reused after the gold is stripped?

Yes. After acid washing and gold stripping, the carbon is reactivated and returned to the circuit for the next cycle. Fresh OraPure is added to replace the small share of carbon worn away in each cycle.

What information is needed for a carbon recommendation?

The circuit type (CIP, CIL or CIC), the type of ore and whether it contains natural carbon, the plant throughput, and the carbon currently in use with its loss rate. With this information the SorbiTech team recommends the right supply for the circuit.

How is OraPure supplied to gold operations in Africa and the GCC?

It is supplied directly by SorbiTech Group, including to CIL and CIP operations in Sudan. Quantities and delivery are arranged per project through the contact page.

Why SorbiTech Carbon

Engineered performance, delivered with precision.

Four commitments that define every grade we manufacture and every project we deliver.

High Quality

ISO 9001 manufacturing with full batch traceability and certified analytical testing on every shipment.

Affordable Prices

Direct from manufacturer pricing with optimised logistics from our regional warehouses in the UAE.

Timely Delivery

Huge quantity of stock available in UAE enables 24 hour dispatch across the GCC and same week delivery globally.

Custom Solutions

Tailored carbon grades engineered for your specific feedstock, contaminant profile, and process conditions.